當前位置:網站首頁 > 圓磨動態
  • 大理石切割鋸片選購注意事項
  • 本站編輯:xghl發布日期:2020-01-28 20:18 瀏覽次數:
大理石切割鋸片是常見的石材片,因為大理石在各種室內外裝飾中用得很多,所以大理石加工工具用得非常多。
 
  那么針對大理石鋸片該怎么選購呢?圓磨鋸片為您介紹大理石切割鋸片選購要點:
 
  1、選擇合適尺寸:要根據自己切割板材需要以及使用機器尺寸選擇合適的尺寸。
 
  2、選擇性價比高的大理石切割鋸片:鋸片不是越貴越好,要根據自己切割的板材選擇對應的鋸片,針對一般的板材太劣質鋸片可能切不到,但性能太好的可能又會造成浪費,要貨比三家,選擇適合自己的。
3、觀察外觀:要看焊縫是否完整,整齊,觀察大理石切割鋸片刀頭與基體在水平面上是否對齊,刀頭如果參差不齊,犬牙交錯,則很可能在使用過程當中造成板材崩邊,甚至刀頭脫落。
 
  4、選擇大廠家:大廠家更有保障。可以了解一下圓磨的鋸片,不論是品質還是服務都比較的完善。
Marble cutting saw blade is a common stone blade, because marble is used in a lot of indoor and outdoor decoration, so marble processing tools are used very much.
So how to choose marble saw blade? The circular grinding saw blade introduces the key points of choosing marble cutting saw blade:
1. Choose the right size: choose the right size according to the needs of cutting plate and the size of the machine.
2. Choose the marble cutting saw blade with high cost performance: the more expensive the saw blade is, the better. You should choose the corresponding saw blade according to the plate you cut. For the general plate which is too poor, the saw blade may not be cut, but the performance which is too good may cause waste. Compare the demand with three companies, and choose the one that suits you.
3. Observe the appearance: to see whether the weld is complete and tidy, observe whether the marble cutting saw blade head and the base are aligned on the horizontal plane. If the blade head is uneven and crisscross, it is likely to cause the plate edge collapse or even the blade head falling off during the use process.
4. Choose big manufacturers: big manufacturers are more secure. Can understand the circular saw blade, whether the quality or service are relatively perfect.

浙公網安備 33052302000218號

document.oncontextmenu = noMenuOne